In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the house, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so that you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak once you place the mask on. Make sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across http://ongzx.com/the-best-cheap-dog-food-finding-the-right-type-of-inexpensive-dog-food/ the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure the ears are level and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll have to do some sanding to make sure that it is secure on your dog. You can do it by sanding off any excess paper that may have been removed from your mask.